Scientists have developed a cloaking technology that can make opaque materials invisible by using light waves from lasers, paving the way for novel ways of camouflaging objects. A completely opaque material is irradiated from above with a specific wave pattern - with the effect that light waves from the left can pass through the material without any obstruction. The technique can be applied to different kinds of waves, and should work with sound waves just as well as with light waves, researchers said.
"Complex materials such as a sugar cube are opaque, because light waves inside them are scattered multiple times," said Stefan Rotter, from Technische Universitat Wien (TU Wien) in Austria. "A light wave can enter and exit the object, but will never pass through the medium on a straight line. Instead, it is scattered into all possible directions," said Rotter. For years many different attempts have been made to outwit this kind of scattering, creating a "cloak of invisibility."
Special materials have been worked out, for example, which are able to guide light waves around an object. Alternatively, also experiments have been performed with objects that can emit light by themselves. When an electronic display sends out exactly the same light as it absorbs in the back, it can appear invisible, at least when looked at in the right angle. "We did not want to reroute the light waves, nor did we want to restore them with additional displays. Our goal was to guide the original light wave through the object, as if the object was not there at all," said Andre Brandstotter, one of the authors of the study.
"This sounds strange, but with certain materials and using our special wave technology, it is indeed possible," said Brandstotter. To make the laser shine, energy has to be supplied by means of a pump beam. Otherwise, the laser material behaves just like any other material - it absorbs part of the incident light. "The crucial point is to pump energy into the material in a spatially tailored way such that light is amplified in exactly the right places, while allowing for absorption at other parts of the material," said Konstantinos Makris from the University of Crete in Greece.
"To achieve this, a beam with exactly the right pattern has to be projected onto the material from above - like from a standard video projector, except with much higher resolution," said Makris. If this pattern perfectly corresponds to the inner irregularities of the material which usually scatter the light, then the projection from above can effectively switch off the scattering, and another beam of light travelling through the material from one side can pass without any obstruction, scattering or loss. "Mathematically, it is not immediately obvious that it is at all possible to find such a pattern," said Rotter.
"Every object we want to make transparent has to be irradiated with its own specific pattern - depending on the microscopic details of the scattering process inside," he said. "The method we developed now allows us to calculate the right pattern for any arbitrary scattering medium," he added.
Updated Date: Sep 14, 2017 17:05 PM